DE80024-XXX.X-X.X: In-Line Aeronautics Type Bus Coupler 4 Stub, Same Side Bus, RTRM

 

 

MIL-STD-1553 Bus Coupler In-Line, Aeronautics Type, 4 Stub, Same Side Bus, RTRM

 

  Brochure

 

 

 

CONTACT US FOR A QUOTE

 

Description

 

MIL-STD-1553 Bus Coupler In-Line, Aeronautics Type, 4 Stub, Same Side Bus, RTRM

Characteristic Impedance

Zo=78 Ohms

Fault Protection

59 Ohms ±1% 1 W (R1-R8) in series with transformer winding on bus side

Termination Resistor Value

78.7 Ohms ±1% 2 W (R10) bus termination

Cable information: our standard pricing includes 1 meter of cable. If you require a longer cable, an additional charge applies per extra meter. Please contact us for custom length requests.

Specifications

Form Factor In-Line
Standard MIL-STD-1553
Number of Stubs 4
Bus Line Configuration Bus lines on same side
Termination Type Right side terminated (RTRM)
Bus Termination Resistor 78.7 Ω ±1 %, 2 W (R10)
Characteristic Impedance 78 Ω
Stub Fault Protection Resistor 59 Ω ±1 %, 1 W (R1-R8), in series with transformer winding on bus side
Transformer Ratio 1:1.41
Common Mode Rejection -45.0 dB max @ 1.0 MHz
Stub Voltage 1.0 V to 14.0 V P-P, line to line, signal voltage, transformer coupling
Input Impedance of Bus 3000 Ω min (75 kHz to 1.0 MHz), stub with open circuit
Dimensions (L x W x H) 86.4 ±1 mm x 25.15 ±1 mm x 16.9 ±1 mm
Cable Type M17/176-00002
High Temperature Operating MIL-STD-810G_CHG-1 Method 501.6 Procedure II, +125 °C
Low Temperature Operating MIL-STD-810G_CHG-1 Method 502.6 Procedure II, -55 °C
High Temperature Storage MIL-STD-810G_CHG-1 Method 501.6 Procedure I, +125 °C
Low Temperature Storage MIL-STD-810G_CHG-1 Method 502.6 Procedure I, -55 °C
Vibration MIL-STD-810G_CHG-1 Method 514.7 Procedure I – Category 12, 15 Hz to 2000 Hz, (performance: W0=0.040 and A=0.02, duration: half hour/axis), (endurance: W0=0.053 and A=0.02, duration: 1 hour/axis)
Shock MIL-STD-810G_CHG-1 Method 516.7 Procedure V (40 g, 11 ms, terminal peak sawtooth, number of shocks: 12, two in each direction of three axes)
Rain MIL-STD-810G Method 506.5 Procedure I
Product Family MIL-STD-1553 Bus Couplers

Schematic