Description
Renice X10B 2.5” SATA SSD adopts advanced NAND management technology, which improves the endurance of industrial SSD, enhances data security, and helps prevent data corruption during unexpected power failure events. X10B 3D TLC SSD combines robust NAND controller hardware error correction capabilities with advanced wear-levelling algorithms and bad block management to improve data reliability and significantly extend the life of the SSD product. Renice X10B industrial SSD is an ideal storage solution for industrial computers, navigation systems, test and measurement instrumentation, security and surveillance equipment, digital signage and networking systems.
Features
- Standard Serial ATA: SATAIII, 6.0Gbps (Backward compatible with SATA1.5 and 3.0Gbps)
- Form factor: 2.5 inch 100mm x 69.85mm x 7mm (LxWxH)
- Performance:
- Sequential Read: up to 550MB/s
- Sequential Write: up to 520MB/s
- Capacities: 3.84TB
- Temperature Range:
- Operating Temperature: -40°C to +85°C
- Storage Temperature: -40°C to +95°C
- Operating Voltage: 5V±5%
- Power Consumption:
- Active mode:
- 3.84TB: <4,000mW
- Idle mode: <1,600mV
- High Reliability:
- Mean Time Between Failure (MTBF) > 1,500,000 hours
- NAND Configuration
- 3 bits per cell (3D TLC NAND)
- Program/ Erase (P/E) Cycle: 3,000 times
- Intelligent features:
- End-to-End data proth protection
- Dynamics and Static Wear Levelling
- AHCI, TRIM, and NCQ Support
- Support S.M.A.R.T (Self’-monitoring, Analysis and Reporting Technology)
- Support TCG OPAL
- Secure Erase (on request)
