VCS³ Stack
£550.00
The VCS³ Stack combines all you need for a SoC-powered SBC in a small, lightweight stack.
Ultra-compact, low-power, Vision, Control and Sensors Solution for Precision Robotics
VCS³ Stack – Getting Started Guide
3D PDF File (right-click, save the file, then open in Adobe Reader)
The VCS³ Stack integrates all the components of a SoC-powered SBC into a single, lightweight, compact footprint.
From top to bottom, the stack includes:
VCS³ Module
Located just below the cooling fan, this is the system's brain, offering extensive I/O for diverse data processing applications.
4-Port USB 2.0 Hub
Controlled by an FE1.1s chip, this hub connects directly to the VCS3 using gold pads and spring-loaded POGO pins. This hardware design ensures stable power, ground, and data (D+/D-) connections even in high-vibration environments. Five built-in LEDs indicate the status of each connected device. Because this hub taps directly into the VCS³’s USB 2.0 lines, the onboard USB-C port is unavailable for power or data.
VCS3-RP2040 Card (50x30 mm)
Situated at the base, this board supplies USB-C power to both the VCS³ module and the fan. A separate USB-C port handles UART and XVC JTAG communications. It also hosts a 22-pin MIPI to 34-pin DSI display converter, designed for use with the VCS³-3D kit.
Specifications
| Dimensions | 60mm x 40mm x 60mm |
| Weight | 70g |
| Supply Voltage | +5V ±5% |
| Supply Current | 3A max. |
| MTBF | On request |
